100LGB Single track unit panel mount option-set-051 Our current pick-ups (50707) provide

Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel flange)

25 Metres of 6 wire FLAT RJ12 cable as used by most brands for the DCC data bus – 6 core (with Black Sheath)

as the tractive effort of the locomotives was relatively low

Roller Gauge (w/handle) OO/HO (Special Fine) 16

Subject to the energy consumption of your model it may continue to move for up to three seconds

100LGB Single track unit panel mount option-set-051 Our current pick-ups (50707) provideSingle track controller designed to sit inside a control panel. This controller has a rotating dial to control the speed of your locomotive and a DPDT switch to control the direction, you can also switch it to the center position to cut off the power to the track. TECHNICAL DETAILS INPUT 1 x 24v AC (GMC M6) or (GMC T6) both rated at 2. 5 Amps OUTPUT 1 x 20v DC Rated at 2. 5 Amps MEASUREMENTS WIDTH 70mm DEPTH 50mm HEIGHT 105mm GMC 100LGB Instructions